Alcohol Testing


Instant Oral Fluid Alcohol Swab

Instant, DOT cleared Oral Fluid alcohol test that detects the Blood Alcohol Level of an individual up to .15. The test takes 2 minutes to swab the mouth and results are available in another 2 minutes. Can be done anywhere, anytime, by anyone with minimal training. The test is run on Oral Fluid by swabbing the mouth and then pressing the saturated swab into the red center. It will run like a thermometer with both a control line and a line indicating the level of alcohol in the system of the individual. In clinical trials, Oral Fluid alcohol levels measured with the tests demonstrated high correlation to blood analyzed by gas chromatography (r=.98) and produced no false positive or false negative results. Has a shelf life of 1.5-2 years and can withstand a wide range of temperatures. Size is 1" x 3". Free training via printed instructions.


Instant Oral Fluid Alcohol Test Strip

Instant, DOT cleared Oral Fluid test strip that will detect an individual's Blood Alcohol Level at or beyond .02. The test uses saliva for detection and only takes seconds. Get results in 2-4 minutes. The test is DOT cleared. The AlcoScreen .02/.04/.08/.30 is not DOT cleared. Both have a shelf life of 1 year and can withstand a wide range of temperatures. Size is 2.25" x 4.25". Free training via printed instructions.


Instant Breath

Instant alcohol breath test tube that detects various levels of alcohol based on the tube's detection level specified. The tube is squeezed to break the center, and then blown into, causing the crystals to change in color if the alcohol level has reached or surpassed that point. Available in .02, .04, .08, and .10. Test takes 12 seconds and you get results in 2 minutes. Has a shelf life of 2 years and can withstand a wide range of temperatures. Size is 2.75" x .25" diameter. Free training via printed instructions.


Instant Breath Alcohol Tester

AlcoMate Premium

Breath Alcohol Tester



   

    ✓FDA 501[K] Cleared

    ✓DOT/NHTSA Approved

    ✓Meets US Coast Guard Requirements

    ✓ISO 9002 Certified


  • Easy One Button Operation
  • No Calibration Service Required
  • Easy Replaceable PRISM Calibration Sensor
  • Deep Lung Air Sampling
  • Active Pressure Sensor
  • Low Battery Indicator
  • Internal Mouthpiece Storage Slot
  • Self Diagnostic System
  • Auto Power Off
  • Range: 0 – 0.400% BAC


This is our flagship breathalyzer that provides you with the most advanced, accurate and convenient commercial breath testing system available. The Premium never requires calibration service. With the unique Easy-Replace Sensor Panel, module replacement takes just a few seconds!


The PRISM Sensor Technology uses advanced next – generation components to improve upon prior oxide semiconductor technologies and introduces a level of accuracy, reliability and ease-of-use never before achieved among portable screening breathalyzers.


Note: The only legally valid measure of %BAC (percent Blood Alcohol Concentration) is obtained by blood testing or other evidential method of measurement. This device is for screening purposes only and should be used as a monitoring guide. This device must be used strictly in accordance with the instructions provided with the product.



Device Specifications:


  • Alcohol Sensor: Oxide Semiconductor Sensor
  • Detection Range: 0.000% - 0.400% BAC
  • Breath Sampling Time: 4 + seconds (Deep-Lung Air)
  • Calibration: None (PRISM Technology)
  • Sensor Accuracy: +/ -0.01 at 0.10% BAC
  • Display: 4 – Digit Decimal LCD (0.000%)
  • Battery: Two 1.5V AA alkaline (included)
  • Dimensions: 4.25 x 2.0 x 0.75 inches
  • Casing: Silver Plastic, Light Grey Trim


Share by: